MAF Sensor Intermittent
2009-2012 Ford Flex 3.5L V6
Description
The Mass Air Flow sensor signal is intermittent. The PCM has detected an erratic or fluctuating signal from the MAF sensor that drops in and out. This can cause inconsistent air/fuel mixture calculations.
Symptoms
- Check Engine Light
- Intermittent rough idle
- Hesitation on acceleration
- Stalling
- Erratic fuel economy
Common Causes
- Loose MAF sensor connector
- Damaged MAF sensor wiring
- Dirty MAF sensor element
- Cracked air intake tube allowing unmetered air
- Failing MAF sensor
Diagnostic Steps
- Inspect MAF sensor connector for looseness or corrosion
- Wiggle test MAF wiring while monitoring live data
- Inspect air intake tube for cracks or loose clamps
- Clean MAF sensor with MAF-specific cleaner
- Monitor MAF sensor readings on scan tool for erratic behavior
Repair Notes
Clean MAF sensor first. If problem persists, inspect wiring and connectors. Replace MAF sensor if faulty.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1100 on Other Vehicles
Common Questions
What does code P1100 mean on a 2009-2012 Ford Flex?
P1100 stands for "MAF Sensor Intermittent". The Mass Air Flow sensor signal is intermittent. The PCM has detected an erratic or fluctuating signal from the MAF sensor that drops in and out. This can cause inconsistent air/fuel mixture calculations.
What are the symptoms of P1100 on a Ford Flex?
Common symptoms of P1100 include: Check Engine Light, Intermittent rough idle, Hesitation on acceleration, Stalling, Erratic fuel economy.
What causes P1100 on a 2009-2012 Ford Flex?
Common causes of P1100 include: Loose MAF sensor connector, Damaged MAF sensor wiring, Dirty MAF sensor element, Cracked air intake tube allowing unmetered air, Failing MAF sensor.