P1250
PRC Solenoid Circuit Malfunction
2009-2012 Ford Flex 3.5L V6
Moderate SeverityPowertrain
Description
The Pressure Regulator Control solenoid circuit has a malfunction. This solenoid controls fuel pressure in the returnless fuel system used on many Ford vehicles.
Symptoms
- Check Engine Light
- High or low fuel pressure
- Rich or lean running
- Poor performance
Common Causes
- Faulty PRC solenoid
- Wiring issue
- Corroded connector
- PCM driver failure
Diagnostic Steps
- Test PRC solenoid resistance
- Inspect wiring and connector
- Command solenoid with scan tool
- Check fuel pressure
Repair Notes
Replace PRC solenoid if faulty. Repair wiring.
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1250 on Other Vehicles
Common Questions
What does code P1250 mean on a 2009-2012 Ford Flex?
P1250 stands for "PRC Solenoid Circuit Malfunction". The Pressure Regulator Control solenoid circuit has a malfunction. This solenoid controls fuel pressure in the returnless fuel system used on many Ford vehicles.
What are the symptoms of P1250 on a Ford Flex?
Common symptoms of P1250 include: Check Engine Light, High or low fuel pressure, Rich or lean running, Poor performance.
What causes P1250 on a 2009-2012 Ford Flex?
Common causes of P1250 include: Faulty PRC solenoid, Wiring issue, Corroded connector, PCM driver failure.