DCT Mechatronic Unit Internal Fault
2012-2018 Ford Focus Electric Electric Motor
Description
The mechatronic unit (combined TCM and hydraulic valve body in DCT transmissions) has detected an internal electronic or hydraulic fault.
Symptoms
- Check Engine Light
- Transmission warning light
- Multiple gear selection faults
- Erratic shifting behavior
- Limp mode in fixed gear
- Loss of drive intermittently
Common Causes
- Mechatronic electronic board failure
- Internal solenoid failure
- Hydraulic valve body wear
- Pressure accumulator leak
- Temperature sensor within unit failed
Diagnostic Steps
- Read mechatronic unit internal fault codes
- Check hydraulic fluid level in mechatronic
- Monitor solenoid commands vs responses
- Test temperature sensor readings
- Perform mechatronic self-test sequence
Repair Notes
Replace or rebuild mechatronic unit. Some manufacturers offer refurbished units. Requires special filling and bleeding procedures.
Related Codes
Other Powertrain Codes
- P0070Ambient Air Temperature Sensor Circuit
- P0071Ambient Air Temperature Sensor Range/Performance
- P0072Ambient Air Temperature Sensor Circuit Low
- P0073Ambient Air Temperature Sensor Circuit High
- P0115Engine Coolant Temperature (ECT) Sensor 1 Circuit
- P0116ECT Sensor 1 Circuit Range/Performance
- P0117ECT Sensor 1 Circuit Low Input
- P0118ECT Sensor 1 Circuit High Input
- P0119ECT Sensor 1 Circuit Intermittent
- P0125Insufficient Coolant Temperature for Closed Loop Fuel Control
P3046 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code P3046 mean on a 2012-2018 Ford Focus Electric?
P3046 stands for "DCT Mechatronic Unit Internal Fault". The mechatronic unit (combined TCM and hydraulic valve body in DCT transmissions) has detected an internal electronic or hydraulic fault.
What are the symptoms of P3046 on a Ford Focus Electric?
Common symptoms of P3046 include: Check Engine Light, Transmission warning light, Multiple gear selection faults, Erratic shifting behavior, Limp mode in fixed gear, Loss of drive intermittently.
What causes P3046 on a 2012-2018 Ford Focus Electric?
Common causes of P3046 include: Mechatronic electronic board failure, Internal solenoid failure, Hydraulic valve body wear, Pressure accumulator leak, Temperature sensor within unit failed.