C0106
Brake Pedal Position Sensor Circuit High
2007-2012 Hyundai Santa Fe 2.4L I4
Moderate SeverityChassisGeneric (SAE)
Description
The brake pedal position sensor voltage exceeds the maximum expected value.
Symptoms
- ABS light on
- Module reads no brake application
- Brake assist may not function
Common Causes
- Open circuit in sensor signal wire
- Short to battery voltage
- Faulty sensor
- Connector disconnected
Diagnostic Steps
- Test signal voltage at sensor and module
- Check for open circuits
- Inspect connector for damage
- Verify sensor ground connection
Repair Notes
Repair open circuit or replace sensor.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0025LF Wheel Speed Sensor Circuit Intermittent
C0106 on Other Vehicles
Common Questions
What does code C0106 mean on a 2007-2012 Hyundai Santa Fe?
C0106 stands for "Brake Pedal Position Sensor Circuit High". The brake pedal position sensor voltage exceeds the maximum expected value.
What are the symptoms of C0106 on a Hyundai Santa Fe?
Common symptoms of C0106 include: ABS light on, Module reads no brake application, Brake assist may not function.
What causes C0106 on a 2007-2012 Hyundai Santa Fe?
Common causes of C0106 include: Open circuit in sensor signal wire, Short to battery voltage, Faulty sensor, Connector disconnected.