P1505moderate severityPowertrain
IAC Valve Opening Coil Circuit Open
on 2011 Hyundai Tucson 2.0L I4 · AWD
What this code means
The PCM has detected an open circuit in the IAC valve opening coil. The idle air control valve uses separate coils for opening and closing; the opening coil circuit is not completing the electrical path.
Symptoms
- Check Engine Light
- Low idle speed
- Engine stalling at idle
- Rough idle
- Engine dies when coming to a stop
Common causes
- Broken wire in IAC opening coil circuit
- Corroded IAC connector
- Faulty IAC valve with open coil winding
- PCM connector issue
- Poor ground connection
Diagnostic steps
- Test IAC valve opening coil resistance with multimeter
- Inspect IAC connector for corrosion or loose pins
- Check wiring continuity from PCM to IAC opening coil
- Test PCM output to IAC opening coil
- Check ground circuit
Repair notes
Replace the IAC valve if the opening coil is internally open; repair wiring or connector if the external circuit is at fault.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1