P0600high severityPowertrain
Serial Communication Link
on 2012 Hyundai Tucson 2.0L I4 · AWD
What this code means
Malfunction in the serial data communication link between the PCM and other modules.
Symptoms
- Check Engine Light
- Multiple warning lights
- Communication errors on scan tool
- Some modules not responding
Common causes
- Faulty CAN bus wiring
- PCM failure
- Module failure on bus
- Terminated resistor issue
- Aftermarket device interfering with bus
Diagnostic steps
- Check for aftermarket devices on OBD-II port
- Test CAN bus wiring
- Check bus termination resistors
- Scan all modules for communication
- Inspect wiring for damage
Repair notes
Check for aftermarket devices first. Then check CAN bus wiring. PCM replacement is rare.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1