P1307low severityPowertrain
Rough Road Sensor Malfunction
on 2017 Hyundai Tucson 2.0L I4 · FWD
What this code means
The PCM has detected a malfunction with the rough road sensor or its circuit. The rough road sensor tells the PCM when the vehicle is on rough terrain so it can distinguish road-induced crankshaft speed variation from actual misfires.
Symptoms
- Check Engine Light
- False misfire codes may set on rough roads
- No driveability symptoms typically
Common causes
- Faulty rough road sensor
- Wiring issue in rough road sensor circuit
- Sensor connector corrosion
- ABS wheel speed sensor issue providing rough road data
Diagnostic steps
- Check rough road sensor signal on scan tool
- Inspect sensor wiring and connector
- Test sensor output
- Check if ABS wheel speed sensors are providing data
Repair notes
Replace the rough road sensor or repair wiring; false misfire codes should stop after repair.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1