Lane Departure Warning Calibration Required
2019-2024 Jaguar I-PACE Electric AWD
Description
The lane departure warning camera requires recalibration, typically after windshield replacement or camera service.
Symptoms
- LDW system disabled
- Calibration warning message
- LDW not detecting lane markings
- System error after windshield replacement
Common Causes
- Windshield replaced without camera recalibration
- Camera mounting bracket shifted
- Camera firmware update needed
- Alignment specification changed
Diagnostic Steps
- Verify camera mounting bracket alignment
- Perform static or dynamic camera calibration
- Check for required calibration targets
- Verify calibration environment meets requirements
- Check for software updates
Repair Notes
Perform ADAS camera calibration using manufacturer procedure. Static calibration requires specific targets and distances.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0009Rear Center Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
B2401 on Other Vehicles
Jaguar E-PACE
2018-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 3.0L V6 Supercharged
Jaguar F-Type
2014-2024 3.0L V6 Supercharged
Jaguar F-Type R
2014-2024 5.0L V8 Supercharged
Jaguar XE
2017-2024 2.0L I4 Turbo
Jaguar XF
2009-2024 3.0L V6 Supercharged
Jaguar XF
2016-2024 2.0L I4 Turbo
Common Questions
What does code B2401 mean on a 2019-2024 Jaguar I-PACE?
B2401 stands for "Lane Departure Warning Calibration Required". The lane departure warning camera requires recalibration, typically after windshield replacement or camera service.
What are the symptoms of B2401 on a Jaguar I-PACE?
Common symptoms of B2401 include: LDW system disabled, Calibration warning message, LDW not detecting lane markings, System error after windshield replacement.
What causes B2401 on a 2019-2024 Jaguar I-PACE?
Common causes of B2401 include: Windshield replaced without camera recalibration, Camera mounting bracket shifted, Camera firmware update needed, Alignment specification changed.