TPMS Receiver Module Malfunction
2000-2008 Jaguar S-Type 3.0L V6
Description
Malfunction in the TPMS receiver module that receives RF signals from tire pressure sensors.
Symptoms
- TPMS warning light flashing then solid
- No tire pressures displayed for any wheel
- TPMS system completely inoperative
Common Causes
- Faulty TPMS receiver module
- Receiver antenna disconnected
- Wiring issue
- Module power supply fault
- Aftermarket tint or coating blocking RF signal
Diagnostic Steps
- Check TPMS module power and ground
- Test receiver antenna connection
- Scan TPMS module for codes
- Check for aftermarket window tint with metallic content
- Verify module communication on CAN bus
Repair Notes
Replace TPMS receiver module or repair antenna connection. Metallic window tint can block sensor RF signals.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B1010 on Other Vehicles
Jaguar E-PACE
2018-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 3.0L V6 Supercharged
Jaguar F-Type
2014-2024 3.0L V6 Supercharged
Jaguar F-Type R
2014-2024 5.0L V8 Supercharged
Jaguar I-PACE
2019-2024 Electric AWD
Jaguar X-Type
2002-2008 2.5L V6
Jaguar XE
2017-2024 2.0L I4 Turbo
Common Questions
What does code B1010 mean on a 2000-2008 Jaguar S-Type?
B1010 stands for "TPMS Receiver Module Malfunction". Malfunction in the TPMS receiver module that receives RF signals from tire pressure sensors.
What are the symptoms of B1010 on a Jaguar S-Type?
Common symptoms of B1010 include: TPMS warning light flashing then solid, No tire pressures displayed for any wheel, TPMS system completely inoperative.
What causes B1010 on a 2000-2008 Jaguar S-Type?
Common causes of B1010 include: Faulty TPMS receiver module, Receiver antenna disconnected, Wiring issue, Module power supply fault, Aftermarket tint or coating blocking RF signal.