Steering Position Sensor Calibration Not Performed
2000-2008 Jaguar S-Type 3.0L V6
Description
The steering angle sensor has not been calibrated or the calibration was lost.
Symptoms
- Stability control light on
- ESC inoperative
- Lane departure warning inactive
- Steering center point unknown to module
Common Causes
- Battery disconnect cleared calibration
- Alignment performed without recalibration
- Module replacement
- Steering component service
Diagnostic Steps
- Perform steering angle sensor calibration with scan tool
- Drive vehicle in a circle to auto-learn center point
- Verify calibration completed successfully
- Check for other stability codes that prevent calibration
Repair Notes
Perform steering angle sensor calibration. Most vehicles require a scan tool procedure followed by a driving routine.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0080 on Other Vehicles
Jaguar E-PACE
2018-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 3.0L V6 Supercharged
Jaguar F-Type
2014-2024 3.0L V6 Supercharged
Jaguar F-Type R
2014-2024 5.0L V8 Supercharged
Jaguar I-PACE
2019-2024 Electric AWD
Jaguar X-Type
2002-2008 2.5L V6
Jaguar XE
2017-2024 2.0L I4 Turbo
Common Questions
What does code C0080 mean on a 2000-2008 Jaguar S-Type?
C0080 stands for "Steering Position Sensor Calibration Not Performed". The steering angle sensor has not been calibrated or the calibration was lost.
What are the symptoms of C0080 on a Jaguar S-Type?
Common symptoms of C0080 include: Stability control light on, ESC inoperative, Lane departure warning inactive, Steering center point unknown to module.
What causes C0080 on a 2000-2008 Jaguar S-Type?
Common causes of C0080 include: Battery disconnect cleared calibration, Alignment performed without recalibration, Module replacement, Steering component service.