Exhaust Camshaft Position Actuator Circuit/Open Bank 1
2002-2008 Jaguar X-Type 2.5L V6
Description
The PCM detected a malfunction in the exhaust camshaft position actuator (VVT solenoid) circuit for Bank 1.
Symptoms
- Check Engine Light
- Rough idle
- Poor emissions
- Reduced power
Common Causes
- Faulty exhaust VVT solenoid
- Wiring damage
- PCM failure
- Low oil level
Diagnostic Steps
- Test VVT solenoid resistance
- Inspect wiring
- Check oil level
- Command solenoid with scan tool
Repair Notes
Replace exhaust VVT solenoid or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0013 on Other Vehicles
Jaguar E-PACE
2018-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 3.0L V6 Supercharged
Jaguar F-Type
2014-2024 3.0L V6 Supercharged
Jaguar F-Type R
2014-2024 5.0L V8 Supercharged
Jaguar S-Type
2000-2008 3.0L V6
Jaguar XE
2017-2024 2.0L I4 Turbo
Jaguar XF
2009-2024 3.0L V6 Supercharged
Common Questions
What does code P0013 mean on a 2002-2008 Jaguar X-Type?
P0013 stands for "Exhaust Camshaft Position Actuator Circuit/Open Bank 1". The PCM detected a malfunction in the exhaust camshaft position actuator (VVT solenoid) circuit for Bank 1.
What are the symptoms of P0013 on a Jaguar X-Type?
Common symptoms of P0013 include: Check Engine Light, Rough idle, Poor emissions, Reduced power.
What causes P0013 on a 2002-2008 Jaguar X-Type?
Common causes of P0013 include: Faulty exhaust VVT solenoid, Wiring damage, PCM failure, Low oil level.