Mass Air Flow (MAF) Circuit
2002-2008 Jaguar X-Type 2.5L V6
Description
The PCM detected a general malfunction in the Mass Air Flow sensor circuit.
Symptoms
- Check Engine Light
- Poor acceleration
- Rough idle
- Engine stalling
- Black smoke
Common Causes
- Faulty MAF sensor
- Dirty MAF sensor element
- Air leak after MAF
- Wiring issue
- Damaged air filter
Diagnostic Steps
- Inspect MAF sensor for contamination
- Check for air leaks between MAF and throttle body
- Test MAF signal with scan tool
- Inspect wiring and connector
- Try cleaning MAF with approved cleaner
Repair Notes
Clean MAF sensor with electronics cleaner. Replace if cleaning does not resolve.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0100 on Other Vehicles
Jaguar E-PACE
2018-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 3.0L V6 Supercharged
Jaguar F-Type
2014-2024 3.0L V6 Supercharged
Jaguar F-Type R
2014-2024 5.0L V8 Supercharged
Jaguar S-Type
2000-2008 3.0L V6
Jaguar XE
2017-2024 2.0L I4 Turbo
Jaguar XF
2009-2024 3.0L V6 Supercharged
Common Questions
What does code P0100 mean on a 2002-2008 Jaguar X-Type?
P0100 stands for "Mass Air Flow (MAF) Circuit". The PCM detected a general malfunction in the Mass Air Flow sensor circuit.
What are the symptoms of P0100 on a Jaguar X-Type?
Common symptoms of P0100 include: Check Engine Light, Poor acceleration, Rough idle, Engine stalling, Black smoke.
What causes P0100 on a 2002-2008 Jaguar X-Type?
Common causes of P0100 include: Faulty MAF sensor, Dirty MAF sensor element, Air leak after MAF, Wiring issue, Damaged air filter.