Initial Setup Not Complete
2002-2008 Jaguar X-Type 2.5L V6
Description
The vehicle or module initial setup procedure has not been completed. Required after major module replacement.
Symptoms
- Multiple systems in limited mode
- Features not available
- Setup reminder messages
- Module self-tests not passed
Common Causes
- Post-replacement setup not done
- Battery disconnect reset setup flags
- Module replacement without completing setup
- Programming interrupted during setup
Diagnostic Steps
- Run complete vehicle setup procedure
- Perform module initialization sequence
- Complete all post-replacement steps per service manual
- Verify each system completes self-test
Repair Notes
Complete the full post-service initialization procedure per manufacturer service manual.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U2100 on Other Vehicles
Jaguar E-PACE
2018-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 2.0L I4 Turbo
Jaguar F-PACE
2017-2024 3.0L V6 Supercharged
Jaguar F-Type
2014-2024 3.0L V6 Supercharged
Jaguar F-Type R
2014-2024 5.0L V8 Supercharged
Jaguar I-PACE
2019-2024 Electric AWD
Jaguar S-Type
2000-2008 3.0L V6
Jaguar XE
2017-2024 2.0L I4 Turbo
Common Questions
What does code U2100 mean on a 2002-2008 Jaguar X-Type?
U2100 stands for "Initial Setup Not Complete". The vehicle or module initial setup procedure has not been completed. Required after major module replacement.
What are the symptoms of U2100 on a Jaguar X-Type?
Common symptoms of U2100 include: Multiple systems in limited mode, Features not available, Setup reminder messages, Module self-tests not passed.
What causes U2100 on a 2002-2008 Jaguar X-Type?
Common causes of U2100 include: Post-replacement setup not done, Battery disconnect reset setup flags, Module replacement without completing setup, Programming interrupted during setup.