P1115moderate severityPowertrain
General Engine Performance
on 2017 Jeep Wrangler 3.6L V6 · 4WD
What this code means
The PCM has detected a general engine performance deviation from expected parameters. The engine is not performing within normal operational thresholds for power output, fuel consumption, or emissions.
Symptoms
- Check Engine Light
- Reduced engine performance
- Poor acceleration
- Rough running
- Increased fuel consumption
Common causes
- Multiple minor faults combining to affect performance
- Worn spark plugs or ignition components
- Partially clogged fuel injectors
- Intake or exhaust restriction
- Low compression in one or more cylinders
Diagnostic steps
- Run full diagnostic scan for companion codes
- Perform relative compression test
- Check fuel injector balance test
- Inspect spark plugs and ignition components
- Check intake and exhaust for restrictions
Repair notes
Address any companion codes first; this code typically resolves once the underlying performance issue is corrected.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1