Back to 1998 Lamborghini Diablo

1998 LAMBORGHINI DIABLO

5.7L V12AWDAUTOMATICgas
1 active safety recall on this vehicle — view recalls
Repairs0Labor515Torque3956Fluid9DTC615Battery0Maintenance0Recalls1
C0077moderate severityChassis

Steering Position Sensor Range/Performance

on 1998 Lamborghini Diablo 5.7L V12 · AWD

What this code means

The steering angle sensor output does not match expected values for current vehicle behavior.

Symptoms

  • Stability control light on
  • ESC activates incorrectly
  • Steering center point wrong after alignment
  • Lane keep assist malfunction

Common causes

  • Steering angle sensor not calibrated after alignment
  • Sensor internal fault
  • Clock spring partially damaged
  • Steering column mechanical issue

Diagnostic steps

  1. Perform steering angle sensor calibration
  2. Compare sensor reading to actual wheel position
  3. Check for clock spring codes
  4. Verify alignment was performed correctly
  5. Test sensor full-range travel lock to lock

Repair notes

Recalibrate steering angle sensor. Perform on a level surface with wheels straight.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →