C0105
Brake Pedal Position Sensor Circuit Low
2007-2014 Land Rover LR2 3.2L I6
Moderate SeverityChassisGeneric (SAE)
Description
The brake pedal position sensor signal voltage is below the minimum threshold.
Symptoms
- ABS light on
- Brake assist fault
- Module reads brake as always applied
Common Causes
- Short to ground in sensor circuit
- Faulty sensor
- Low supply voltage to sensor
Diagnostic Steps
- Test sensor signal voltage
- Check for shorts to ground
- Verify supply voltage at sensor
- Inspect wiring harness
Repair Notes
Repair short circuit or replace brake pedal position sensor.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0105 on Other Vehicles
Land Rover Defender 110
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender 90
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender V8
2022-2024 5.0L V8 Supercharged
Land Rover Discovery
1994-2004 4.0L V8
Land Rover Discovery
2017-2024 3.0L V6 Supercharged
Land Rover Discovery Sport
2015-2024 2.0L I4 Turbo
Land Rover Freelander
1997-2006 2.5L V6
Land Rover LR3
2005-2009 4.4L V8
Common Questions
What does code C0105 mean on a 2007-2014 Land Rover LR2?
C0105 stands for "Brake Pedal Position Sensor Circuit Low". The brake pedal position sensor signal voltage is below the minimum threshold.
What are the symptoms of C0105 on a Land Rover LR2?
Common symptoms of C0105 include: ABS light on, Brake assist fault, Module reads brake as always applied.
What causes C0105 on a 2007-2014 Land Rover LR2?
Common causes of C0105 include: Short to ground in sensor circuit, Faulty sensor, Low supply voltage to sensor.