Exhaust Camshaft Position Actuator Circuit/Open Bank 1
2007-2014 Land Rover LR2 3.2L I6
Description
The PCM detected a malfunction in the exhaust camshaft position actuator (VVT solenoid) circuit for Bank 1.
Symptoms
- Check Engine Light
- Rough idle
- Poor emissions
- Reduced power
Common Causes
- Faulty exhaust VVT solenoid
- Wiring damage
- PCM failure
- Low oil level
Diagnostic Steps
- Test VVT solenoid resistance
- Inspect wiring
- Check oil level
- Command solenoid with scan tool
Repair Notes
Replace exhaust VVT solenoid or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0013 on Other Vehicles
Land Rover Defender 110
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender 90
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender V8
2022-2024 5.0L V8 Supercharged
Land Rover Discovery
1994-2004 4.0L V8
Land Rover Discovery
2017-2024 3.0L V6 Supercharged
Land Rover Discovery Sport
2015-2024 2.0L I4 Turbo
Land Rover Freelander
1997-2006 2.5L V6
Land Rover LR3
2005-2009 4.4L V8
Common Questions
What does code P0013 mean on a 2007-2014 Land Rover LR2?
P0013 stands for "Exhaust Camshaft Position Actuator Circuit/Open Bank 1". The PCM detected a malfunction in the exhaust camshaft position actuator (VVT solenoid) circuit for Bank 1.
What are the symptoms of P0013 on a Land Rover LR2?
Common symptoms of P0013 include: Check Engine Light, Rough idle, Poor emissions, Reduced power.
What causes P0013 on a 2007-2014 Land Rover LR2?
Common causes of P0013 include: Faulty exhaust VVT solenoid, Wiring damage, PCM failure, Low oil level.