P0201
Injector Circuit/Open - Cylinder 1
2007-2014 Land Rover LR2 3.2L I6
Moderate SeverityPowertrainGeneric (SAE)
Description
Open circuit detected in the cylinder 1 fuel injector circuit.
Symptoms
- Check Engine Light
- Misfire cylinder 1
- Rough idle
- Loss of power
Common Causes
- Faulty injector #1
- Open wiring to injector
- PCM driver failure
- Corroded connector
Diagnostic Steps
- Test injector #1 resistance (typically 11-18 ohms)
- Check wiring continuity
- Swap injector with known good cylinder
- Check PCM output
Repair Notes
Replace injector #1 or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0201 on Other Vehicles
Land Rover Defender 110
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender 90
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender V8
2022-2024 5.0L V8 Supercharged
Land Rover Discovery
1994-2004 4.0L V8
Land Rover Discovery
2017-2024 3.0L V6 Supercharged
Land Rover Discovery Sport
2015-2024 2.0L I4 Turbo
Land Rover Freelander
1997-2006 2.5L V6
Land Rover LR3
2005-2009 4.4L V8
Common Questions
What does code P0201 mean on a 2007-2014 Land Rover LR2?
P0201 stands for "Injector Circuit/Open - Cylinder 1". Open circuit detected in the cylinder 1 fuel injector circuit.
What are the symptoms of P0201 on a Land Rover LR2?
Common symptoms of P0201 include: Check Engine Light, Misfire cylinder 1, Rough idle, Loss of power.
What causes P0201 on a 2007-2014 Land Rover LR2?
Common causes of P0201 include: Faulty injector #1, Open wiring to injector, PCM driver failure, Corroded connector.