P2401
EVAP Leak Detection Pump Control Circuit Low
2007-2014 Land Rover LR2 3.2L I6
Moderate SeverityPowertrainGeneric (SAE)
Description
Low voltage on the EVAP leak detection pump control circuit.
Symptoms
- Check engine light
- Failed EVAP test
Common Causes
- Short to ground
- Damaged harness
- Pump motor failure
Diagnostic Steps
- Measure circuit voltage
- Check for shorts to ground
- Test pump
Repair Notes
Repair short or replace pump.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2401 on Other Vehicles
Land Rover Defender V8
2022-2024 5.0L V8 Supercharged
Land Rover Discovery
1994-2004 4.0L V8
Land Rover Discovery
2017-2024 3.0L V6 Supercharged
Land Rover Discovery Sport
2015-2024 2.0L I4 Turbo
Land Rover Freelander
1997-2006 2.5L V6
Land Rover LR3
2005-2009 4.4L V8
Land Rover LR4
2010-2016 5.0L V8
Land Rover Range Rover Evoque
2012-2024 2.0L I4 Turbo
Common Questions
What does code P2401 mean on a 2007-2014 Land Rover LR2?
P2401 stands for "EVAP Leak Detection Pump Control Circuit Low". Low voltage on the EVAP leak detection pump control circuit.
What are the symptoms of P2401 on a Land Rover LR2?
Common symptoms of P2401 include: Check engine light, Failed EVAP test.
What causes P2401 on a 2007-2014 Land Rover LR2?
Common causes of P2401 include: Short to ground, Damaged harness, Pump motor failure.