P2419
EVAP Switching Valve Control Circuit Low
2007-2014 Land Rover LR2 3.2L I6
Low SeverityPowertrainGeneric (SAE)
Description
Low signal on the EVAP system switching valve circuit.
Symptoms
- Check engine light
- EVAP test failure
Common Causes
- Valve circuit short to ground
- Failed valve solenoid
- Wiring damage
Diagnostic Steps
- Check valve connector
- Measure solenoid resistance
- Check wiring
Repair Notes
Replace valve or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2419 on Other Vehicles
Land Rover Defender V8
2022-2024 5.0L V8 Supercharged
Land Rover Discovery
1994-2004 4.0L V8
Land Rover Discovery
2017-2024 3.0L V6 Supercharged
Land Rover Discovery Sport
2015-2024 2.0L I4 Turbo
Land Rover Freelander
1997-2006 2.5L V6
Land Rover LR3
2005-2009 4.4L V8
Land Rover LR4
2010-2016 5.0L V8
Land Rover Range Rover Evoque
2012-2024 2.0L I4 Turbo
Common Questions
What does code P2419 mean on a 2007-2014 Land Rover LR2?
P2419 stands for "EVAP Switching Valve Control Circuit Low". Low signal on the EVAP system switching valve circuit.
What are the symptoms of P2419 on a Land Rover LR2?
Common symptoms of P2419 include: Check engine light, EVAP test failure.
What causes P2419 on a 2007-2014 Land Rover LR2?
Common causes of P2419 include: Valve circuit short to ground, Failed valve solenoid, Wiring damage.