CVT Secondary Pulley Speed Sensor Circuit
2007-2014 Land Rover LR2 3.2L I6
Description
The secondary (output) pulley speed sensor in the CVT is malfunctioning.
Symptoms
- Check Engine Light
- Incorrect speed display
- Transmission ratio errors
- Harsh ratio changes
- Limp mode
- No speedometer reading
Common Causes
- Faulty secondary speed sensor
- Damaged wiring
- Tone ring contamination
- Corroded connector
- Sensor air gap incorrect
Diagnostic Steps
- Read secondary pulley speed PID
- Test sensor resistance
- Inspect wiring and connector
- Check tone ring condition
- Compare to vehicle speed sensor
Repair Notes
Replace secondary pulley speed sensor.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P3022 on Other Vehicles
Land Rover Defender 110
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender 90
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender V8
2022-2024 5.0L V8 Supercharged
Land Rover Discovery
1994-2004 4.0L V8
Land Rover Discovery
2017-2024 3.0L V6 Supercharged
Land Rover Discovery Sport
2015-2024 2.0L I4 Turbo
Land Rover Freelander
1997-2006 2.5L V6
Land Rover LR3
2005-2009 4.4L V8
Common Questions
What does code P3022 mean on a 2007-2014 Land Rover LR2?
P3022 stands for "CVT Secondary Pulley Speed Sensor Circuit". The secondary (output) pulley speed sensor in the CVT is malfunctioning.
What are the symptoms of P3022 on a Land Rover LR2?
Common symptoms of P3022 include: Check Engine Light, Incorrect speed display, Transmission ratio errors, Harsh ratio changes, Limp mode, No speedometer reading.
What causes P3022 on a 2007-2014 Land Rover LR2?
Common causes of P3022 include: Faulty secondary speed sensor, Damaged wiring, Tone ring contamination, Corroded connector, Sensor air gap incorrect.