Transmission Output Shaft Bearing Noise Detected
2007-2014 Land Rover LR2 3.2L I6
Description
The TCM or vibration sensor has detected a signature consistent with output shaft bearing wear in the transmission.
Symptoms
- Whining noise proportional to vehicle speed
- Noise changes with load but not with gear
- Vibration felt through floor
- Noise present in all gears
- Transmission fluid may have metallic sheen
Common Causes
- Output shaft bearing wear
- Insufficient lubrication
- Bearing preload incorrect
- High mileage wear
- Contaminated fluid causing bearing damage
Diagnostic Steps
- Listen for bearing noise at varying speeds
- Check transmission fluid for metal particles
- Perform vibration analysis
- Road test in multiple gears to isolate source
- Inspect transmission for external leaks
Repair Notes
Transmission removal and bearing replacement required. Inspect output shaft for scoring. Replace fluid and filter.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P3067 on Other Vehicles
Land Rover Defender 110
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender 90
2020-2024 3.0L I6 Mild Hybrid
Land Rover Defender V8
2022-2024 5.0L V8 Supercharged
Land Rover Discovery
2017-2024 3.0L V6 Supercharged
Land Rover Discovery Sport
2015-2024 2.0L I4 Turbo
Land Rover Freelander
1997-2006 2.5L V6
Land Rover LR3
2005-2009 4.4L V8
Land Rover LR4
2010-2016 5.0L V8
Common Questions
What does code P3067 mean on a 2007-2014 Land Rover LR2?
P3067 stands for "Transmission Output Shaft Bearing Noise Detected". The TCM or vibration sensor has detected a signature consistent with output shaft bearing wear in the transmission.
What are the symptoms of P3067 on a Land Rover LR2?
Common symptoms of P3067 include: Whining noise proportional to vehicle speed, Noise changes with load but not with gear, Vibration felt through floor, Noise present in all gears, Transmission fluid may have metallic sheen.
What causes P3067 on a 2007-2014 Land Rover LR2?
Common causes of P3067 include: Output shaft bearing wear, Insufficient lubrication, Bearing preload incorrect, High mileage wear, Contaminated fluid causing bearing damage.