P1335
No Crankshaft Position Sensor Signal
2012-2012 Lexus LFA 4.8L V10
Critical SeverityPowertrain
Description
The ECM lost the CKP sensor signal while engine is running, causing timing loss.
Symptoms
- CEL
- Stalling
- Intermittent misfires
- No-start
- Loss of power
Common Causes
- Faulty CKP sensor
- Damaged wiring
- Excessive air gap
- Damaged reluctor wheel
Diagnostic Steps
- Test CKP sensor resistance
- Check air gap
- Inspect wiring
- Check reluctor wheel
Repair Notes
Replace CKP sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1335 on Other Vehicles
Common Questions
What does code P1335 mean on a 2012-2012 Lexus LFA?
P1335 stands for "No Crankshaft Position Sensor Signal". The ECM lost the CKP sensor signal while engine is running, causing timing loss.
What are the symptoms of P1335 on a Lexus LFA?
Common symptoms of P1335 include: CEL, Stalling, Intermittent misfires, No-start, Loss of power.
What causes P1335 on a 2012-2012 Lexus LFA?
Common causes of P1335 include: Faulty CKP sensor, Damaged wiring, Excessive air gap, Damaged reluctor wheel.