Intake Manifold Runner Position Sensor/Switch Circuit Bank 1
2014-2014 Lincoln MKX 3.7L V6
The 2014 Lincoln MKX is equipped with a 3.7L V6 engine. Below you'll find detailed p2014 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The ECM cannot read the position of the intake manifold runner flaps on bank 1.
Symptoms
- Check engine light
- Default to fixed runner position
- Slight performance loss
Common Causes
- Failed position sensor
- Wiring fault
- Corroded connector
- ECM issue
Diagnostic Steps
- Check sensor connector
- Measure sensor signal voltage
- Verify wiring continuity
Repair Notes
Replace runner position sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
P2014 on Other Vehicles
Lincoln Aviator
2003-2003 4.6L V8 DOHC
Lincoln Aviator
2004-2004 4.6L V8 DOHC
Lincoln Aviator
2005-2005 4.6L V8 DOHC
Lincoln Aviator
2020-2020 3.0L Twin-Turbo V6
Lincoln Aviator
2020-2020 3.0L V6 Twin Turbo
Lincoln Aviator
2021-2021 3.0L Twin-Turbo V6
Lincoln Aviator
2021-2021 3.0L V6 Twin Turbo
Lincoln Aviator
2022-2022 3.0L Twin-Turbo V6
Common Questions
What does code P2014 mean on a 2014-2014 Lincoln MKX?
P2014 stands for "Intake Manifold Runner Position Sensor/Switch Circuit Bank 1". The ECM cannot read the position of the intake manifold runner flaps on bank 1.
What are the symptoms of P2014 on a Lincoln MKX?
Common symptoms of P2014 include: Check engine light, Default to fixed runner position, Slight performance loss.
What causes P2014 on a 2014-2014 Lincoln MKX?
Common causes of P2014 include: Failed position sensor, Wiring fault, Corroded connector, ECM issue.
Last updated: March 2026