B0085
SRS Airbag Control Module Internal Fault
2016-2021 Mazda CX-3 2.0L I4
Critical SeverityBodyGeneric (SAE)
Description
The SRS airbag control module has detected an internal hardware or software fault.
Symptoms
- Airbag warning light on
- SRS system completely disabled
- All airbags inoperative
- Multiple SRS codes may be set
Common Causes
- ACM internal circuit failure
- ACM software corruption
- Power supply issue to ACM
- Previous crash event stored in module
Diagnostic Steps
- Check ACM power and ground circuits
- Read all stored SRS codes
- Check for crash event data
- Test ACM communication on diagnostic bus
- Inspect ACM connector
Repair Notes
Replace airbag control module. Module must be programmed to vehicle. Previous crash data means module must be replaced, not cleared.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0005Driver Knee Airbag Deployment Circuit
B0085 on Other Vehicles
Common Questions
What does code B0085 mean on a 2016-2021 Mazda CX-3?
B0085 stands for "SRS Airbag Control Module Internal Fault". The SRS airbag control module has detected an internal hardware or software fault.
What are the symptoms of B0085 on a Mazda CX-3?
Common symptoms of B0085 include: Airbag warning light on, SRS system completely disabled, All airbags inoperative, Multiple SRS codes may be set.
What causes B0085 on a 2016-2021 Mazda CX-3?
Common causes of B0085 include: ACM internal circuit failure, ACM software corruption, Power supply issue to ACM, Previous crash event stored in module.