B1001
TPMS Sensor Circuit - Right Front
2013-2013 Mazda Mazda3 2.0L I4
Low SeverityBodyGeneric (SAE)
The 2013 Mazda Mazda3 is equipped with a 2.0L inline-4 engine. Below you'll find detailed b1001 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction in the right front tire pressure monitoring sensor.
Symptoms
- TPMS warning light on
- Right front pressure not displayed
- Dashes on display for this tire
Common Causes
- Dead sensor battery
- Faulty sensor
- Sensor damage
- Sensor not registered
Diagnostic Steps
- Trigger sensor with TPMS tool
- Check registration
- Inspect sensor
- Verify battery status
Repair Notes
Replace TPMS sensor and register to vehicle.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B1001 on Other Vehicles
Common Questions
What does code B1001 mean on a 2013-2013 Mazda Mazda3?
B1001 stands for "TPMS Sensor Circuit - Right Front". Malfunction in the right front tire pressure monitoring sensor.
What are the symptoms of B1001 on a Mazda Mazda3?
Common symptoms of B1001 include: TPMS warning light on, Right front pressure not displayed, Dashes on display for this tire.
What causes B1001 on a 2013-2013 Mazda Mazda3?
Common causes of B1001 include: Dead sensor battery, Faulty sensor, Sensor damage, Sensor not registered.
Last updated: March 2026