ShopBaseComplete shop management for auto repair shops Β· $249/mo
Try ShopBase β†’
B0011

Driver Side Airbag Deployment Circuit Open

2016-2016 Mazda Mazda3 2.5L I4

Critical SeverityBodyGeneric (SAE)

The 2016 Mazda Mazda3 is equipped with a 2.5L inline-4 engine. Below you'll find detailed b0011 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Description

An open circuit was detected in the driver side airbag deployment loop. The airbag will not deploy in a side impact with this fault.

Symptoms

  • Airbag warning light on
  • SRS fault stored
  • Driver side airbag inoperative

Common Causes

  • Disconnected airbag connector
  • Broken wire in seat or door
  • Faulty airbag squib
  • Aftermarket seat cover interfering with connector

Diagnostic Steps

  1. Check driver side airbag connector
  2. Inspect wiring from seat to B-pillar
  3. Measure deployment loop resistance
  4. Remove aftermarket seat covers and recheck

Repair Notes

Reconnect or repair the open circuit. Check for aftermarket accessories that may have dislodged the connector.

Related Codes

B0010Driver Side Airbag DeploymentB0012Driver Side Airbag Deployment Circuit Short to Ground

Other Body Codes

B0011 on Other Vehicles

Common Questions

What does code B0011 mean on a 2016-2016 Mazda Mazda3?

B0011 stands for "Driver Side Airbag Deployment Circuit Open". An open circuit was detected in the driver side airbag deployment loop. The airbag will not deploy in a side impact with this fault.

What are the symptoms of B0011 on a Mazda Mazda3?

Common symptoms of B0011 include: Airbag warning light on, SRS fault stored, Driver side airbag inoperative.

What causes B0011 on a 2016-2016 Mazda Mazda3?

Common causes of B0011 include: Disconnected airbag connector, Broken wire in seat or door, Faulty airbag squib, Aftermarket seat cover interfering with connector.

Last updated: March 2026

View Labor Times | View Torque Specs | View Fluid Specs