Driver Side Airbag Deployment Circuit Short to Battery
2008-2008 Mazda Tribute 2.5L I4
The 2008 Mazda Tribute is equipped with a 2.5L inline-4 engine. Below you'll find detailed b0013 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
A short to battery voltage was detected in the driver side airbag deployment circuit.
Symptoms
- Airbag warning light on
- SRS fault stored
- Unintended deployment risk
Common Causes
- Wiring harness chafing against metal
- Connector pin damage
- Faulty airbag squib
- Incorrect wiring repair
Diagnostic Steps
- Disconnect battery and wait
- Inspect wiring for chafing
- Check connector pins
- Measure circuit for shorts to B+
Repair Notes
Locate and repair the short to battery voltage. Professional service required.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B0013 on Other Vehicles
Common Questions
What does code B0013 mean on a 2008-2008 Mazda Tribute?
B0013 stands for "Driver Side Airbag Deployment Circuit Short to Battery". A short to battery voltage was detected in the driver side airbag deployment circuit.
What are the symptoms of B0013 on a Mazda Tribute?
Common symptoms of B0013 include: Airbag warning light on, SRS fault stored, Unintended deployment risk.
What causes B0013 on a 2008-2008 Mazda Tribute?
Common causes of B0013 include: Wiring harness chafing against metal, Connector pin damage, Faulty airbag squib, Incorrect wiring repair.
Last updated: March 2026