Brake Pedal Position Sensor Circuit High
2008-2008 Mazda Tribute 2.5L I4
The 2008 Mazda Tribute is equipped with a 2.5L inline-4 engine. Below you'll find detailed c0106 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The brake pedal position sensor voltage exceeds the maximum expected value.
Symptoms
- ABS light on
- Module reads no brake application
- Brake assist may not function
Common Causes
- Open circuit in sensor signal wire
- Short to battery voltage
- Faulty sensor
- Connector disconnected
Diagnostic Steps
- Test signal voltage at sensor and module
- Check for open circuits
- Inspect connector for damage
- Verify sensor ground connection
Repair Notes
Repair open circuit or replace sensor.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0106 on Other Vehicles
Common Questions
What does code C0106 mean on a 2008-2008 Mazda Tribute?
C0106 stands for "Brake Pedal Position Sensor Circuit High". The brake pedal position sensor voltage exceeds the maximum expected value.
What are the symptoms of C0106 on a Mazda Tribute?
Common symptoms of C0106 include: ABS light on, Module reads no brake application, Brake assist may not function.
What causes C0106 on a 2008-2008 Mazda Tribute?
Common causes of C0106 include: Open circuit in sensor signal wire, Short to battery voltage, Faulty sensor, Connector disconnected.
Last updated: March 2026