Intake Camshaft Position Actuator Circuit/Open Bank 1
2012-2015 Mercedes-Benz ML 3.5L V6
Description
The PCM detected a malfunction in the intake camshaft position actuator circuit for Bank 1. The VVT solenoid controls oil flow to the camshaft phaser.
Symptoms
- Check Engine Light
- Rough idle
- Reduced power
- Engine rattle on startup
Common Causes
- Faulty VVT solenoid
- Low oil level or dirty oil
- Wiring issue
- Camshaft phaser failure
Diagnostic Steps
- Check engine oil level and condition
- Test VVT solenoid resistance
- Inspect wiring to solenoid
- Command solenoid on/off with scan tool
- Check oil pressure
Repair Notes
Replace VVT solenoid or repair wiring. Ensure oil is clean and at proper level.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0010 on Other Vehicles
Mercedes-Benz 500SL R129
1990-2002 5.0L V8 M119
Mercedes-Benz 600SL R129
1993-2002 6.0L V12 M120
Mercedes-Benz A220 W177
2019-2024 2.0L I4 Turbo M260
Mercedes-Benz A250 W176
2013-2018 2.0L I4 Turbo M270
Mercedes-Benz A35 AMG W177
2020-2024 2.0L I4 Turbo M260
Mercedes-Benz A45 AMG W176
2014-2018 2.0L I4 Turbo M133
Mercedes-Benz A45 AMG W177
2020-2024 2.0L I4 Turbo M139
Mercedes-Benz AMG GT
2015-2024 4.0L Turbo V8
Common Questions
What does code P0010 mean on a 2012-2015 Mercedes-Benz ML?
P0010 stands for "Intake Camshaft Position Actuator Circuit/Open Bank 1". The PCM detected a malfunction in the intake camshaft position actuator circuit for Bank 1. The VVT solenoid controls oil flow to the camshaft phaser.
What are the symptoms of P0010 on a Mercedes-Benz ML?
Common symptoms of P0010 include: Check Engine Light, Rough idle, Reduced power, Engine rattle on startup.
What causes P0010 on a 2012-2015 Mercedes-Benz ML?
Common causes of P0010 include: Faulty VVT solenoid, Low oil level or dirty oil, Wiring issue, Camshaft phaser failure.