C0531
eLSD Clutch Actuator Circuit
2000-2012 Mitsubishi Eclipse GT 3.0L V6
High SeverityChassisGeneric (SAE)
Description
Malfunction in the actuator that controls the electronic limited slip differential clutch pack.
Symptoms
- eLSD warning light
- Differential not locking
- Reduced traction
- Single wheel spin
Common Causes
- Actuator solenoid failure
- Wiring damage
- Module driver fault
- Actuator overheated
Diagnostic Steps
- Test actuator solenoid resistance
- Command actuator with scan tool
- Check wiring and connector
- Monitor actuator current draw
- Check for overheating signs
Repair Notes
Replace eLSD actuator. Change differential fluid.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0531 on Other Vehicles
Mitsubishi Colt JP
2002-2012 1.3L I4 4A90
Mitsubishi Colt JP
2002-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2025 2.2L I4 Turbo Diesel 4N14
Mitsubishi Eclipse
2000-2005 2.4L I4
Mitsubishi Eclipse
2000-2005 3.0L V6
Mitsubishi Eclipse
2000-2012 2.4L I4
Mitsubishi Eclipse
2006-2012 2.4L I4
Mitsubishi Eclipse
2006-2012 3.8L V6
Common Questions
What does code C0531 mean on a 2000-2012 Mitsubishi Eclipse GT?
C0531 stands for "eLSD Clutch Actuator Circuit". Malfunction in the actuator that controls the electronic limited slip differential clutch pack.
What are the symptoms of C0531 on a Mitsubishi Eclipse GT?
Common symptoms of C0531 include: eLSD warning light, Differential not locking, Reduced traction, Single wheel spin.
What causes C0531 on a 2000-2012 Mitsubishi Eclipse GT?
Common causes of C0531 include: Actuator solenoid failure, Wiring damage, Module driver fault, Actuator overheated.