Invalid Data Received from Vehicle Dynamics Control Module
2000-2005 Mitsubishi Eclipse 2.4L I4
Description
Data from the stability control or yaw rate module is invalid.
Symptoms
- Stability control disabled
- ESC warning light
- Vehicle dynamics system fault
- Traction control off
Common Causes
- Yaw rate sensor calibration lost
- CAN bus noise
- Module partial failure
- Sensor wiring issue
Diagnostic Steps
- Check yaw rate sensor data with scan tool
- Recalibrate yaw rate sensor
- Check CAN bus quality
- Test sensor wiring
- Update module software
Repair Notes
Recalibrate yaw rate sensor. If calibration fails, replace sensor module.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U0416 on Other Vehicles
Mitsubishi 3000GT
1991-1999 3.0L V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L Twin Turbo V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2012 1.3L I4 4A90
Mitsubishi Colt JP
2002-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2025 2.2L I4 Turbo Diesel 4N14
Mitsubishi Diamante
1992-1996 3.0L V6
Mitsubishi Diamante
1997-2004 3.5L V6
Common Questions
What does code U0416 mean on a 2000-2005 Mitsubishi Eclipse?
U0416 stands for "Invalid Data Received from Vehicle Dynamics Control Module". Data from the stability control or yaw rate module is invalid.
What are the symptoms of U0416 on a Mitsubishi Eclipse?
Common symptoms of U0416 include: Stability control disabled, ESC warning light, Vehicle dynamics system fault, Traction control off.
What causes U0416 on a 2000-2005 Mitsubishi Eclipse?
Common causes of U0416 include: Yaw rate sensor calibration lost, CAN bus noise, Module partial failure, Sensor wiring issue.