Output Speed Sensor Circuit No Signal
2007-2007 Mitsubishi Eclipse 2.4L I4
The 2007 Mitsubishi Eclipse is equipped with a 2.4L inline-4 engine. Below you'll find detailed p0722 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
No signal from output speed sensor.
Symptoms
- No speedometer
- No shifting
- Limp mode
Common Causes
- Faulty sensor
- Open wiring
- Disconnected
Diagnostic Steps
- Test signal
- Check wiring
Repair Notes
Replace sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0722 on Other Vehicles
Mitsubishi 3000GT
1996-1996 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1997-1997 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1998-1998 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1999-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2002 1.3L I4 4A90
Mitsubishi Colt JP
2002-2002 1.5L I4 4A91
Mitsubishi Colt JP
2003-2003 1.3L I4 4A90
Mitsubishi Colt JP
2003-2003 1.5L I4 4A91
Common Questions
What does code P0722 mean on a 2007-2007 Mitsubishi Eclipse?
P0722 stands for "Output Speed Sensor Circuit No Signal". No signal from output speed sensor.
What are the symptoms of P0722 on a Mitsubishi Eclipse?
Common symptoms of P0722 include: No speedometer, No shifting, Limp mode.
What causes P0722 on a 2007-2007 Mitsubishi Eclipse?
Common causes of P0722 include: Faulty sensor, Open wiring, Disconnected.
Last updated: March 2026