Lane Departure Warning Calibration Required
2012-2017 Mitsubishi i-MiEV Electric
Description
The lane departure warning camera requires recalibration, typically after windshield replacement or camera service.
Symptoms
- LDW system disabled
- Calibration warning message
- LDW not detecting lane markings
- System error after windshield replacement
Common Causes
- Windshield replaced without camera recalibration
- Camera mounting bracket shifted
- Camera firmware update needed
- Alignment specification changed
Diagnostic Steps
- Verify camera mounting bracket alignment
- Perform static or dynamic camera calibration
- Check for required calibration targets
- Verify calibration environment meets requirements
- Check for software updates
Repair Notes
Perform ADAS camera calibration using manufacturer procedure. Static calibration requires specific targets and distances.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0009Rear Center Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
B2401 on Other Vehicles
Mitsubishi Colt JP
2002-2012 1.3L I4 4A90
Mitsubishi Colt JP
2002-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2025 2.2L I4 Turbo Diesel 4N14
Mitsubishi Eclipse
2000-2012 2.4L I4
Mitsubishi Eclipse
2006-2012 2.4L I4
Mitsubishi Eclipse
2006-2012 3.8L V6
Mitsubishi Eclipse Cross
2018-2024 1.5L I4 Turbo
Mitsubishi Eclipse Cross
2018-2024 1.5L Turbo I4
Common Questions
What does code B2401 mean on a 2012-2017 Mitsubishi i-MiEV?
B2401 stands for "Lane Departure Warning Calibration Required". The lane departure warning camera requires recalibration, typically after windshield replacement or camera service.
What are the symptoms of B2401 on a Mitsubishi i-MiEV?
Common symptoms of B2401 include: LDW system disabled, Calibration warning message, LDW not detecting lane markings, System error after windshield replacement.
What causes B2401 on a 2012-2017 Mitsubishi i-MiEV?
Common causes of B2401 include: Windshield replaced without camera recalibration, Camera mounting bracket shifted, Camera firmware update needed, Alignment specification changed.