C0079
Steering Position Sensor Circuit High
2012-2017 Mitsubishi i-MiEV Electric
Moderate SeverityChassisGeneric (SAE)
Description
The steering angle sensor signal voltage is higher than the maximum expected value.
Symptoms
- Stability control disabled
- ESC light on
- Incorrect steering position displayed
Common Causes
- Signal wire open circuit
- Short to battery voltage
- Sensor reference voltage issue
- Sensor failure
Diagnostic Steps
- Test signal voltage at sensor connector
- Check for open circuits in signal wire
- Verify reference voltage
- Monitor output through full range
- Inspect connector pins
Repair Notes
Repair open circuit or replace steering angle sensor.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0079 on Other Vehicles
Mitsubishi 3000GT
1991-1999 3.0L V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L Twin Turbo V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2012 1.3L I4 4A90
Mitsubishi Colt JP
2002-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2025 2.2L I4 Turbo Diesel 4N14
Mitsubishi Diamante
1992-1996 3.0L V6
Mitsubishi Diamante
1997-2004 3.5L V6
Common Questions
What does code C0079 mean on a 2012-2017 Mitsubishi i-MiEV?
C0079 stands for "Steering Position Sensor Circuit High". The steering angle sensor signal voltage is higher than the maximum expected value.
What are the symptoms of C0079 on a Mitsubishi i-MiEV?
Common symptoms of C0079 include: Stability control disabled, ESC light on, Incorrect steering position displayed.
What causes C0079 on a 2012-2017 Mitsubishi i-MiEV?
Common causes of C0079 include: Signal wire open circuit, Short to battery voltage, Sensor reference voltage issue, Sensor failure.