Active Roll Control Actuator Circuit Front
2011-2011 Mitsubishi Lancer 2.0L I4
The 2011 Mitsubishi Lancer is equipped with a 2.0L inline-4 engine. Below you'll find detailed c0341 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction in the front active roll control actuator.
Symptoms
- Front body roll increased
- Warning light on
- Front stabilizer bar ineffective
- Handling loose in corners
Common Causes
- Front actuator motor or valve failure
- Wiring damage
- Actuator seized
- Control module fault
Diagnostic Steps
- Test actuator winding resistance or hydraulic valve
- Command actuator with scan tool
- Inspect for mechanical binding
- Check wiring and connector
Repair Notes
Replace front active roll control actuator.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0341 on Other Vehicles
Mitsubishi Colt JP
2005-2005 1.3L I4 4A90
Mitsubishi Colt JP
2005-2005 1.5L I4 4A91
Mitsubishi Colt JP
2006-2006 1.3L I4 4A90
Mitsubishi Colt JP
2006-2006 1.5L I4 4A91
Mitsubishi Colt JP
2007-2007 1.3L I4 4A90
Mitsubishi Colt JP
2007-2007 1.5L I4 4A91
Mitsubishi Colt JP
2008-2008 1.3L I4 4A90
Mitsubishi Colt JP
2008-2008 1.5L I4 4A91
Common Questions
What does code C0341 mean on a 2011-2011 Mitsubishi Lancer?
C0341 stands for "Active Roll Control Actuator Circuit Front". Malfunction in the front active roll control actuator.
What are the symptoms of C0341 on a Mitsubishi Lancer?
Common symptoms of C0341 include: Front body roll increased, Warning light on, Front stabilizer bar ineffective, Handling loose in corners.
What causes C0341 on a 2011-2011 Mitsubishi Lancer?
Common causes of C0341 include: Front actuator motor or valve failure, Wiring damage, Actuator seized, Control module fault.
Last updated: March 2026