Torque Vectoring Control Module Fault
2011-2011 Mitsubishi Lancer 2.0L I4
The 2011 Mitsubishi Lancer is equipped with a 2.0L inline-4 engine. Below you'll find detailed c0541 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Internal fault in the torque vectoring module that distributes torque side-to-side.
Symptoms
- Torque vectoring warning
- Handling reduced in corners
- Sport mode limited
- AWD light on
Common Causes
- Module internal failure
- Module overheating
- Software error
- Power supply issue to module
Diagnostic Steps
- Check module power and ground
- Scan for internal module codes
- Check module temperature
- Attempt module reset
- Check for software updates
Repair Notes
Replace torque vectoring module. Program and calibrate after installation.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0541 on Other Vehicles
Mitsubishi Colt JP
2010-2010 1.3L I4 4A90
Mitsubishi Colt JP
2010-2010 1.5L I4 4A91
Mitsubishi Colt JP
2011-2011 1.3L I4 4A90
Mitsubishi Colt JP
2011-2011 1.5L I4 4A91
Mitsubishi Colt JP
2012-2012 1.3L I4 4A90
Mitsubishi Colt JP
2012-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2019 2.2L I4 Turbo Diesel 4N14
Mitsubishi Delica D:5
2020-2020 2.2L I4 Turbo Diesel 4N14
Common Questions
What does code C0541 mean on a 2011-2011 Mitsubishi Lancer?
C0541 stands for "Torque Vectoring Control Module Fault". Internal fault in the torque vectoring module that distributes torque side-to-side.
What are the symptoms of C0541 on a Mitsubishi Lancer?
Common symptoms of C0541 include: Torque vectoring warning, Handling reduced in corners, Sport mode limited, AWD light on.
What causes C0541 on a 2011-2011 Mitsubishi Lancer?
Common causes of C0541 include: Module internal failure, Module overheating, Software error, Power supply issue to module.
Last updated: March 2026