Shift Solenoid A
2011-2011 Mitsubishi Lancer 2.0L I4
The 2011 Mitsubishi Lancer is equipped with a 2.0L inline-4 engine. Below you'll find detailed p0750 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction in shift solenoid A.
Symptoms
- Check Engine Light
- Harsh shifting
- Wrong gear starts
- Limp mode
- Stuck in one gear
Common Causes
- Faulty shift solenoid A
- Wiring damage
- PCM/TCM driver failure
- Contaminated fluid damaging solenoid
Diagnostic Steps
- Test solenoid resistance
- Check wiring
- Command solenoid with scan tool
- Check fluid condition
Repair Notes
Replace shift solenoid A. Often requires valve body removal.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0750 on Other Vehicles
Mitsubishi 3000GT
1996-1996 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1997-1997 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1998-1998 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1999-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2002 1.3L I4 4A90
Mitsubishi Colt JP
2002-2002 1.5L I4 4A91
Mitsubishi Colt JP
2003-2003 1.3L I4 4A90
Mitsubishi Colt JP
2003-2003 1.5L I4 4A91
Common Questions
What does code P0750 mean on a 2011-2011 Mitsubishi Lancer?
P0750 stands for "Shift Solenoid A". Malfunction in shift solenoid A.
What are the symptoms of P0750 on a Mitsubishi Lancer?
Common symptoms of P0750 include: Check Engine Light, Harsh shifting, Wrong gear starts, Limp mode, Stuck in one gear.
What causes P0750 on a 2011-2011 Mitsubishi Lancer?
Common causes of P0750 include: Faulty shift solenoid A, Wiring damage, PCM/TCM driver failure, Contaminated fluid damaging solenoid.
Last updated: March 2026