Shift Quality - Harsh Downshift Detected
2011-2011 Mitsubishi Lancer 2.0L I4
The 2011 Mitsubishi Lancer is equipped with a 2.0L inline-4 engine. Below you'll find detailed p3062 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The TCM detected excessively harsh downshifts. The transition between gears during deceleration is abrupt.
Symptoms
- Check Engine Light
- Harsh downshifts
- Vehicle lurches on deceleration
- Engine braking feels excessive
- Driveline shudder on downshift
- Abrupt speed change during coast-down
Common Causes
- Faulty shift timing solenoid
- Torque converter clutch not releasing
- Pressure control solenoid malfunction
- Valve body wear
- Incorrect TCM calibration
Diagnostic Steps
- Monitor shift quality PIDs during deceleration
- Check TCC release timing
- Test pressure control solenoid
- Inspect shift solenoid operation
- Review TCM software version
Repair Notes
Replace pressure control solenoid or valve body. TCM reflash may be available from manufacturer.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P3062 on Other Vehicles
Mitsubishi Colt JP
2002-2002 1.3L I4 4A90
Mitsubishi Colt JP
2002-2002 1.5L I4 4A91
Mitsubishi Colt JP
2003-2003 1.3L I4 4A90
Mitsubishi Colt JP
2003-2003 1.5L I4 4A91
Mitsubishi Colt JP
2004-2004 1.3L I4 4A90
Mitsubishi Colt JP
2004-2004 1.5L I4 4A91
Mitsubishi Colt JP
2005-2005 1.3L I4 4A90
Mitsubishi Colt JP
2005-2005 1.5L I4 4A91
Common Questions
What does code P3062 mean on a 2011-2011 Mitsubishi Lancer?
P3062 stands for "Shift Quality - Harsh Downshift Detected". The TCM detected excessively harsh downshifts. The transition between gears during deceleration is abrupt.
What are the symptoms of P3062 on a Mitsubishi Lancer?
Common symptoms of P3062 include: Check Engine Light, Harsh downshifts, Vehicle lurches on deceleration, Engine braking feels excessive, Driveline shudder on downshift, Abrupt speed change during coast-down.
What causes P3062 on a 2011-2011 Mitsubishi Lancer?
Common causes of P3062 include: Faulty shift timing solenoid, Torque converter clutch not releasing, Pressure control solenoid malfunction, Valve body wear, Incorrect TCM calibration.
Last updated: March 2026