Immobilizer Transponder Authentication Failure
2011-2011 Mitsubishi Lancer 2.4L I4
The 2011 Mitsubishi Lancer is equipped with a 2.4L inline-4 engine. Below you'll find detailed b0102 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The immobilizer detected a transponder signal but authentication failed. The key code does not match the stored code.
Symptoms
- Engine cranks but will not start
- Security light solid on
- Key rejected by system
Common Causes
- Key not programmed to this vehicle
- Immobilizer module lost key memory
- Aftermarket key with incorrect code
- Immobilizer control module failure
Diagnostic Steps
- Try all registered keys
- Check key programming status
- Attempt key relearn procedure
- Scan immobilizer module codes
- Verify VIN match in immobilizer
Repair Notes
Reprogram key to vehicle using manufacturer procedure. May require dealer tool.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B0102 on Other Vehicles
Mitsubishi 3000GT
1996-1996 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1997-1997 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1998-1998 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1999-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2002 1.3L I4 4A90
Mitsubishi Colt JP
2002-2002 1.5L I4 4A91
Mitsubishi Colt JP
2003-2003 1.3L I4 4A90
Mitsubishi Colt JP
2003-2003 1.5L I4 4A91
Common Questions
What does code B0102 mean on a 2011-2011 Mitsubishi Lancer?
B0102 stands for "Immobilizer Transponder Authentication Failure". The immobilizer detected a transponder signal but authentication failed. The key code does not match the stored code.
What are the symptoms of B0102 on a Mitsubishi Lancer?
Common symptoms of B0102 include: Engine cranks but will not start, Security light solid on, Key rejected by system.
What causes B0102 on a 2011-2011 Mitsubishi Lancer?
Common causes of B0102 include: Key not programmed to this vehicle, Immobilizer module lost key memory, Aftermarket key with incorrect code, Immobilizer control module failure.
Last updated: March 2026