ABS Front Inlet Valve Solenoid Circuit
2011-2011 Mitsubishi Lancer 2.4L I4
The 2011 Mitsubishi Lancer is equipped with a 2.4L inline-4 engine. Below you'll find detailed c0055 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction detected in the front ABS inlet valve solenoid circuit inside the hydraulic modulator.
Symptoms
- ABS warning light on
- ABS not functioning on front wheels
- Longer stopping distances
- Brake pedal pulsation absent during ABS event
Common Causes
- Faulty inlet valve solenoid
- ABS module internal failure
- Wiring to module damaged
- Corroded module connector
Diagnostic Steps
- Check ABS module connector for corrosion
- Test solenoid resistance through module connector pins
- Inspect wiring between ABS module and ECU
- Command solenoid activation with scan tool
- Check for internal module fault codes
Repair Notes
If solenoid has failed internally, the ABS hydraulic modulator assembly must be replaced.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0055 on Other Vehicles
Mitsubishi 3000GT
1996-1996 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1997-1997 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1998-1998 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1999-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2002 1.3L I4 4A90
Mitsubishi Colt JP
2002-2002 1.5L I4 4A91
Mitsubishi Colt JP
2003-2003 1.3L I4 4A90
Mitsubishi Colt JP
2003-2003 1.5L I4 4A91
Common Questions
What does code C0055 mean on a 2011-2011 Mitsubishi Lancer?
C0055 stands for "ABS Front Inlet Valve Solenoid Circuit". Malfunction detected in the front ABS inlet valve solenoid circuit inside the hydraulic modulator.
What are the symptoms of C0055 on a Mitsubishi Lancer?
Common symptoms of C0055 include: ABS warning light on, ABS not functioning on front wheels, Longer stopping distances, Brake pedal pulsation absent during ABS event.
What causes C0055 on a 2011-2011 Mitsubishi Lancer?
Common causes of C0055 include: Faulty inlet valve solenoid, ABS module internal failure, Wiring to module damaged, Corroded module connector.
Last updated: March 2026