Transfer Case Control Module Malfunction
2011-2011 Mitsubishi Lancer 2.4L I4
The 2011 Mitsubishi Lancer is equipped with a 2.4L inline-4 engine. Below you'll find detailed c0500 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Internal fault in the transfer case control module that manages 4WD/AWD operation.
Symptoms
- 4WD warning light
- Service 4WD message
- Cannot shift between 2WD and 4WD
- Transfer case stuck in current mode
Common Causes
- Module internal failure
- Module power supply fault
- Software error
- CAN communication loss
- Overheated module
Diagnostic Steps
- Check module power supply and ground
- Scan for CAN communication codes
- Check module connector for corrosion
- Attempt module reset
- Check for software updates
Repair Notes
Replace transfer case control module. Reprogram and calibrate after installation.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0500 on Other Vehicles
Mitsubishi 3000GT
1998-1998 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1999-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2002 1.3L I4 4A90
Mitsubishi Colt JP
2002-2002 1.5L I4 4A91
Mitsubishi Colt JP
2003-2003 1.3L I4 4A90
Mitsubishi Colt JP
2003-2003 1.5L I4 4A91
Mitsubishi Colt JP
2004-2004 1.3L I4 4A90
Mitsubishi Colt JP
2004-2004 1.5L I4 4A91
Common Questions
What does code C0500 mean on a 2011-2011 Mitsubishi Lancer?
C0500 stands for "Transfer Case Control Module Malfunction". Internal fault in the transfer case control module that manages 4WD/AWD operation.
What are the symptoms of C0500 on a Mitsubishi Lancer?
Common symptoms of C0500 include: 4WD warning light, Service 4WD message, Cannot shift between 2WD and 4WD, Transfer case stuck in current mode.
What causes C0500 on a 2011-2011 Mitsubishi Lancer?
Common causes of C0500 include: Module internal failure, Module power supply fault, Software error, CAN communication loss, Overheated module.
Last updated: March 2026