Mass Air Flow (MAF) Circuit
2011-2011 Mitsubishi Lancer 2.4L I4
The 2011 Mitsubishi Lancer is equipped with a 2.4L inline-4 engine. Below you'll find detailed p0100 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The PCM detected a general malfunction in the Mass Air Flow sensor circuit.
Symptoms
- Check Engine Light
- Poor acceleration
- Rough idle
- Engine stalling
- Black smoke
Common Causes
- Faulty MAF sensor
- Dirty MAF sensor element
- Air leak after MAF
- Wiring issue
- Damaged air filter
Diagnostic Steps
- Inspect MAF sensor for contamination
- Check for air leaks between MAF and throttle body
- Test MAF signal with scan tool
- Inspect wiring and connector
- Try cleaning MAF with approved cleaner
Repair Notes
Clean MAF sensor with electronics cleaner. Replace if cleaning does not resolve.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0100 on Other Vehicles
Mitsubishi 3000GT
1996-1996 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1997-1997 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1998-1998 3.0L V6 Twin Turbo
Mitsubishi 3000GT
1999-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2002 1.3L I4 4A90
Mitsubishi Colt JP
2002-2002 1.5L I4 4A91
Mitsubishi Colt JP
2003-2003 1.3L I4 4A90
Mitsubishi Colt JP
2003-2003 1.5L I4 4A91
Common Questions
What does code P0100 mean on a 2011-2011 Mitsubishi Lancer?
P0100 stands for "Mass Air Flow (MAF) Circuit". The PCM detected a general malfunction in the Mass Air Flow sensor circuit.
What are the symptoms of P0100 on a Mitsubishi Lancer?
Common symptoms of P0100 include: Check Engine Light, Poor acceleration, Rough idle, Engine stalling, Black smoke.
What causes P0100 on a 2011-2011 Mitsubishi Lancer?
Common causes of P0100 include: Faulty MAF sensor, Dirty MAF sensor element, Air leak after MAF, Wiring issue, Damaged air filter.
Last updated: March 2026