ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
P3473

EV/Hybrid Battery Preconditioning System Fault

2018-2021 Mitsubishi Outlander PHEV 2.0L I4 PHEV

Moderate SeverityPowertrainGeneric (SAE)

Description

The battery preconditioning system that heats or cools the battery before charging or driving has a fault.

Symptoms

  • Battery not preconditioned for fast charging
  • Reduced fast charge speed in cold weather
  • Battery not warmed before departure
  • Higher energy consumption in cold
  • Range reduced in extreme temperatures

Common Causes

  • Preconditioning control module fault
  • PTC heater element failure
  • Heat pump refrigerant circuit leak
  • Preconditioning pump failure
  • Timer or scheduled charge communication error

Diagnostic Steps

  1. Test preconditioning activation via scan tool
  2. Monitor battery temperature during preconditioning
  3. Check PTC heater circuit
  4. Test preconditioning coolant pump
  5. Verify scheduled charge and precondition settings

Repair Notes

Replace failed PTC heater, pump, or control module. Ensure scheduled charging settings are configured to enable preconditioning.

Related Codes

P3204HV Battery Cooling System Flow Rate Low

Other Powertrain Codes

P3473 on Other Vehicles

Common Questions

What does code P3473 mean on a 2018-2021 Mitsubishi Outlander PHEV?

P3473 stands for "EV/Hybrid Battery Preconditioning System Fault". The battery preconditioning system that heats or cools the battery before charging or driving has a fault.

What are the symptoms of P3473 on a Mitsubishi Outlander PHEV?

Common symptoms of P3473 include: Battery not preconditioned for fast charging, Reduced fast charge speed in cold weather, Battery not warmed before departure, Higher energy consumption in cold, Range reduced in extreme temperatures.

What causes P3473 on a 2018-2021 Mitsubishi Outlander PHEV?

Common causes of P3473 include: Preconditioning control module fault, PTC heater element failure, Heat pump refrigerant circuit leak, Preconditioning pump failure, Timer or scheduled charge communication error.

View Labor Times | View Torque Specs | View Fluid Specs