ABS Pump Motor Runs Continuously
2007-2012 Nissan Altima 2.5L I4
Description
The ABS hydraulic pump motor runs continuously or for an excessive duration.
Symptoms
- ABS pump motor audible constantly
- ABS light may be on
- Battery drain if vehicle is off
- Brake pedal feels spongy
Common Causes
- Internal hydraulic leak in ABS modulator
- Faulty pressure switch
- ABS module commanding pump continuously
- Leaking accumulator or valve
Diagnostic Steps
- Monitor pump run time with scan tool
- Check brake fluid level at ABS unit
- Inspect for external brake fluid leaks
- Test pressure switch
- Check for related solenoid valve codes
Repair Notes
Diagnose the cause of continuous pump run. Replace modulator if internal leak.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0067 on Other Vehicles
Nissan 200SX
1995-1998 1.6L I4 GA16DE
Nissan 200SX SE-R
1995-1998 2.0L I4 SR20DE
Nissan 240SX
1995-1998 2.4L I4 KA24DE
Nissan 300ZX
1990-1996 3.0L V6 VG30DE
Nissan 300ZX Twin Turbo
1990-1996 3.0L Twin-Turbo V6 VG30DETT
Nissan 350Z
2003-2006 3.5L V6 VQ35DE
Nissan 350Z
2007-2009 3.5L V6 VQ35HR
Nissan 370Z
2009-2020 3.7L V6 VQ37VHR
Common Questions
What does code C0067 mean on a 2007-2012 Nissan Altima?
C0067 stands for "ABS Pump Motor Runs Continuously". The ABS hydraulic pump motor runs continuously or for an excessive duration.
What are the symptoms of C0067 on a Nissan Altima?
Common symptoms of C0067 include: ABS pump motor audible constantly, ABS light may be on, Battery drain if vehicle is off, Brake pedal feels spongy.
What causes C0067 on a 2007-2012 Nissan Altima?
Common causes of C0067 include: Internal hydraulic leak in ABS modulator, Faulty pressure switch, ABS module commanding pump continuously, Leaking accumulator or valve.