Steering Position Sensor Calibration Not Performed
2007-2012 Nissan Altima 2.5L I4
Description
The steering angle sensor has not been calibrated or the calibration was lost.
Symptoms
- Stability control light on
- ESC inoperative
- Lane departure warning inactive
- Steering center point unknown to module
Common Causes
- Battery disconnect cleared calibration
- Alignment performed without recalibration
- Module replacement
- Steering component service
Diagnostic Steps
- Perform steering angle sensor calibration with scan tool
- Drive vehicle in a circle to auto-learn center point
- Verify calibration completed successfully
- Check for other stability codes that prevent calibration
Repair Notes
Perform steering angle sensor calibration. Most vehicles require a scan tool procedure followed by a driving routine.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0080 on Other Vehicles
Nissan 200SX
1995-1998 1.6L I4 GA16DE
Nissan 200SX SE-R
1995-1998 2.0L I4 SR20DE
Nissan 240SX
1995-1998 2.4L I4 KA24DE
Nissan 300ZX
1990-1996 3.0L V6 VG30DE
Nissan 300ZX Twin Turbo
1990-1996 3.0L Twin-Turbo V6 VG30DETT
Nissan 350Z
2003-2006 3.5L V6 VQ35DE
Nissan 350Z
2007-2009 3.5L V6 VQ35HR
Nissan 370Z
2009-2020 3.7L V6 VQ37VHR
Common Questions
What does code C0080 mean on a 2007-2012 Nissan Altima?
C0080 stands for "Steering Position Sensor Calibration Not Performed". The steering angle sensor has not been calibrated or the calibration was lost.
What are the symptoms of C0080 on a Nissan Altima?
Common symptoms of C0080 include: Stability control light on, ESC inoperative, Lane departure warning inactive, Steering center point unknown to module.
What causes C0080 on a 2007-2012 Nissan Altima?
Common causes of C0080 include: Battery disconnect cleared calibration, Alignment performed without recalibration, Module replacement, Steering component service.