P0107
MAP/BARO Pressure Circuit Low Input
2007-2012 Nissan Altima 2.5L I4
Moderate SeverityPowertrainGeneric (SAE)
Description
The MAP sensor signal voltage is below the minimum expected value.
Symptoms
- Check Engine Light
- Rich running
- Black smoke
- Loss of power
Common Causes
- Short to ground in MAP circuit
- Faulty MAP sensor
- Disconnected vacuum hose
Diagnostic Steps
- Test MAP voltage
- Check for shorts to ground
- Verify vacuum hose connection
Repair Notes
Repair wiring or replace MAP sensor.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0107 on Other Vehicles
Nissan 200SX
1995-1998 1.6L I4 GA16DE
Nissan 200SX SE-R
1995-1998 2.0L I4 SR20DE
Nissan 240SX
1995-1998 2.4L I4 KA24DE
Nissan 300ZX
1990-1996 3.0L V6 VG30DE
Nissan 300ZX Twin Turbo
1990-1996 3.0L Twin-Turbo V6 VG30DETT
Nissan 350Z
2003-2006 3.5L V6 VQ35DE
Nissan 350Z
2007-2009 3.5L V6 VQ35HR
Nissan 370Z
2009-2020 3.7L V6 VQ37VHR
Common Questions
What does code P0107 mean on a 2007-2012 Nissan Altima?
P0107 stands for "MAP/BARO Pressure Circuit Low Input". The MAP sensor signal voltage is below the minimum expected value.
What are the symptoms of P0107 on a Nissan Altima?
Common symptoms of P0107 include: Check Engine Light, Rich running, Black smoke, Loss of power.
What causes P0107 on a 2007-2012 Nissan Altima?
Common causes of P0107 include: Short to ground in MAP circuit, Faulty MAP sensor, Disconnected vacuum hose.