Lost Communication with Vehicle Dynamics Control Module
2007-2012 Nissan Altima 2.5L I4
Description
Cannot communicate with the vehicle dynamics or yaw rate sensor module.
Symptoms
- Stability control light on
- ESC disabled
- Traction control not functioning
- Yaw rate data unavailable
Common Causes
- Yaw rate sensor module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Sensor damage from impact
Diagnostic Steps
- Check yaw rate sensor module fuse
- Test power and ground
- Check CAN wiring
- Inspect sensor for physical damage
- Check sensor mounting
Repair Notes
Check module fuse and mounting. Yaw rate sensors can be damaged by impacts or underbody contact.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U0122 on Other Vehicles
Nissan 200SX
1995-1998 1.6L I4 GA16DE
Nissan 200SX SE-R
1995-1998 2.0L I4 SR20DE
Nissan 240SX
1995-1998 2.4L I4 KA24DE
Nissan 300ZX
1990-1996 3.0L V6 VG30DE
Nissan 300ZX Twin Turbo
1990-1996 3.0L Twin-Turbo V6 VG30DETT
Nissan 350Z
2003-2006 3.5L V6 VQ35DE
Nissan 350Z
2007-2009 3.5L V6 VQ35HR
Nissan 370Z
2009-2020 3.7L V6 VQ37VHR
Common Questions
What does code U0122 mean on a 2007-2012 Nissan Altima?
U0122 stands for "Lost Communication with Vehicle Dynamics Control Module". Cannot communicate with the vehicle dynamics or yaw rate sensor module.
What are the symptoms of U0122 on a Nissan Altima?
Common symptoms of U0122 include: Stability control light on, ESC disabled, Traction control not functioning, Yaw rate data unavailable.
What causes U0122 on a 2007-2012 Nissan Altima?
Common causes of U0122 include: Yaw rate sensor module failure, CAN bus wiring, Module power loss, Fuse blown, Sensor damage from impact.