P1443
EVAP Canister Control Vacuum Switch Circuit
2012-2024 Nissan NV200 2.0L I4
Low SeverityPowertrain
Description
Fault in EVAP canister control vacuum switch for leak detection.
Symptoms
- CEL
- EVAP monitor incomplete
- Failed emissions
Common Causes
- Faulty vacuum switch
- Damaged wiring
- EVAP leak
- Faulty purge solenoid
Diagnostic Steps
- Test vacuum switch
- Inspect wiring
- Smoke test EVAP
- Test purge solenoid
Repair Notes
Replace vacuum switch or repair leak.
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1443 on Other Vehicles
Nissan 200SX
1995-1998 1.6L I4 GA16DE
Nissan 200SX SE-R
1995-1998 2.0L I4 SR20DE
Nissan 240SX
1995-1998 2.4L I4 KA24DE
Nissan 300ZX
1990-1996 3.0L V6 VG30DE
Nissan 300ZX Twin Turbo
1990-1996 3.0L Twin-Turbo V6 VG30DETT
Nissan 350Z
2003-2006 3.5L V6 VQ35DE
Nissan 350Z
2007-2009 3.5L V6 VQ35HR
Nissan 370Z
2009-2020 3.7L V6 VQ37VHR
Common Questions
What does code P1443 mean on a 2012-2024 Nissan NV200?
P1443 stands for "EVAP Canister Control Vacuum Switch Circuit". Fault in EVAP canister control vacuum switch for leak detection.
What are the symptoms of P1443 on a Nissan NV200?
Common symptoms of P1443 include: CEL, EVAP monitor incomplete, Failed emissions.
What causes P1443 on a 2012-2024 Nissan NV200?
Common causes of P1443 include: Faulty vacuum switch, Damaged wiring, EVAP leak, Faulty purge solenoid.