C0105
Brake Pedal Position Sensor Circuit Low
1995-2005 Pontiac Sunfire 2.2L I4
Moderate SeverityChassisGeneric (SAE)
Description
The brake pedal position sensor signal voltage is below the minimum threshold.
Symptoms
- ABS light on
- Brake assist fault
- Module reads brake as always applied
Common Causes
- Short to ground in sensor circuit
- Faulty sensor
- Low supply voltage to sensor
Diagnostic Steps
- Test sensor signal voltage
- Check for shorts to ground
- Verify supply voltage at sensor
- Inspect wiring harness
Repair Notes
Repair short circuit or replace brake pedal position sensor.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0105 on Other Vehicles
Pontiac Aztek
2001-2005 3.4L V6
Pontiac Bonneville
1990-1999 3.8L V6
Pontiac Bonneville
2000-2005 3.8L V6
Pontiac Bonneville GXP
2000-2005 4.6L V8
Pontiac Bonneville GXP
2000-2005 4.6L V8 Northstar
Pontiac Bonneville SSEi
1992-1999 3.8L Supercharged V6
Pontiac Bonneville SSEi
1992-1999 3.8L V6 Supercharged
Pontiac Firebird
1993-1997 3.4L V6
Common Questions
What does code C0105 mean on a 1995-2005 Pontiac Sunfire?
C0105 stands for "Brake Pedal Position Sensor Circuit Low". The brake pedal position sensor signal voltage is below the minimum threshold.
What are the symptoms of C0105 on a Pontiac Sunfire?
Common symptoms of C0105 include: ABS light on, Brake assist fault, Module reads brake as always applied.
What causes C0105 on a 1995-2005 Pontiac Sunfire?
Common causes of C0105 include: Short to ground in sensor circuit, Faulty sensor, Low supply voltage to sensor.